Introduction
Drawing the T-Rex dinosaur can be fun and a learning experience. The steps here are simple to follow, free, and printable. You might want to have a pencil and a piece of paper handy so that you can draw along with me! I’m going to show you how to draw a Tyrannosaurus Rex in just six easy steps. This is an easy tutorial that will help you learn to draw this awesome dinosaur in no time at all. Let’s get started!
Draw a circle behind the head and a curve under the neck to form the body.
Next, draw a circle behind the head and a curve under the neck to form the body.
Remember that you can change as many lines as you want when you draw this character.
Draw a pair of curved lines through the dinosaur’s neck, outlining its spine.
- Draw a pair of curved lines through the dinosaur’s neck, outlining its spine.
- When you’re drawing the spine, make sure it’s smoothly curving along and not jerking between different angles.
- You want to make sure that your lines follow through from one end to another as smoothly as possible.
Draw a small horizontal line in the center of the dinosaur’s face.
The next step in your T-Rex drawing is to sketch out a small horizontal line in the center of its face. This will be the mouth, and you’ll want it to be open wide enough for him to swallow an antelope whole. The width of the mouth should be about half as wide as his eyes, which are also drawn on either side of this line. The width should not go beyond 50% due to perspective issues with large creatures like this one; if yours does, make sure that you size down accordingly!
The final piece of advice that I have for you when drawing Tyrannosaurus Rex is making sure that your lines are parallel with one another so they don’t look messy or crooked when viewed from afar. That being said, there’s no rule saying they have to be completely straight—just keep them neat so everything looks balanced!
Trace two pairs of parallel lines below the jaw to outline the front legs.
For the front legs, trace two pairs of parallel lines below the jaw. The first line is where your T-Rex’s body meets its head, and then there are two lines that go down from that point to create the shape of the front leg.
These lines should be about as long as your arm span if you stretch out your arms (but not too long). They should also be pretty close together—they shouldn’t be more than about twice as far apart as their length.
Step 5:Draw a shorter curved line on each side of the face for the back legs.
The 5th step to draw a T-Rex is drawing the back legs. Drawing the back legs is simple, just draw two short, curved lines through the dinosaur’s neck, outlining its spine.
Step 6: Draw two pairs of parallel lines below the jawline to outline each front leg.
Step 7: Draw two short, curved lines under each leg to form feet
Draw two short, curved lines under each leg to form feet.
To draw the dino run character’s feet, you will need to draw two short curved lines under each leg. The easiest way to do this is to first draw a line from the bottom of your previous sketch. Then, make a second line that curves away from it so that it forms half of a circle. Finally, connect those two lines together with another curved line at about 2/3rds distance between them and 1/3rd distance from the front-most point of your head shape (see illustration below).
You can also get creative with how you shade in these areas by adding more shadow on one side of each foot than on others or by drawing an outline around each foot as well.
Draw two small rectangles on top of the dino’s head to create ears.
Now, draw two small rectangles on top of the dino’s head to create ears. Make sure they are thin and don’t get too big or you won’t be able to see the face anymore!
Let’s give him some teeth! Inside his mouth, draw lots of irregular curves that meet at jagged points.
With your Dremel tool, begin carving out the rounded edges of your T-Rex’s head. Make sure that you are still carving away from yourself—you want to be careful not to cut yourself in any way.
Once you’ve carved away enough material to create a large circle, use your sanding drum attachment to smooth out all of the rough edges and make it look even more like a dinosaur skull.
Add some color with acrylic paints! Using a flat brush will help with blending between colors so that they blend nicely together without having any hard lines showing up on his back or shoulders.
You can draw dino run characters
You can draw dino run characters. Dino Run is a game that involves drawing your own character and then running away from dinosaurs. If you want to learn how to draw dino run characters, this blog is for you!
First, start with a stick figure. The first thing we need to do is define the shape of our character by drawing a stick figure version of him or her in the center of the page. This stick figure should be very simple and should include only four parts: head, arms, legs and torso (the torso is just two lines). It’s okay if your stick figure doesn’t look much like your final drawing yet—that comes later! Next step: draw some basic shapes around it as guides for where facial features will go later on.”
Conclusion
Drawing this dino-run character may seem intimidating at first, but don’t worry! Once you learn the technique, it will leave you feeling more confident in your abilities and eager to continue working on your art. We hope that our step-by-step instructions have helped make things easier for you along the way as well.
